VA-6100MS
Specifications:
|
AC power supply |
|
|
Voltage |
AC 220V±20% 50-60Hz |
|
Maximum current |
<0.5A |
|
Fuse |
250V/1A,slow |
|
DC power supply |
|
|
Voltage |
DC24V, 18-31V adaptive |
|
Maximum current |
<5A |
|
Maximum power consumption |
120W |
|
Performance Index |
|
|
Number of output partitions |
Up to 8 |
|
The output voltage |
100V |
|
Output type |
Bridge-tied output without transformer boost |
|
Output Power |
500W (maximum output of a single partition) |
|
Maximum output power |
8×500W |
|
Override type |
3-wire and 4-wire |
|
4-wire override output voltage |
24V |
|
Power amplifier status detection time |
< 0.5S |
|
Partition Detection Status |
Short circuit, open circuit, short circuit to ground |
|
Partition detection time |
< 0.5S |
|
Contact output |
|
|
8 channels programmable relay output |
Short circuit, no voltage |
|
8 channels programmable trigger input |
Short-circuit input, short-circuit input with detection, voltage input |
|
Short circuit mode |
3.3V voltage, short-contact trigger, no linkage line monitoring function |
|
Short mode with detection |
3.3V voltage, short-contact trigger, support linkage line fault alarm |
|
Voltage mode |
18-31V voltage input, voltage trigger, support linkage line fault alarm |
|
Cooling method |
Air-Cooled |
|
Protection method |
Delay/Overheat/Short Circuit/Over Load |


